A vacuum cleaner is an essential device to keep your home clean. However, it may happen that its performance decreases over time. Here are some tips to improve the performance of your vacuum cleaner and help you keep your interior spotless.
Choosing the right vacuum bag
The choice of vacuum cleaner bag has a direct impact on the performance of the device. It is therefore essential to choose the right type of bag according to your vacuum cleaner.
Opt for quality bags
Choose quality bags, which have a higher filtration capacity and allow better air circulation. Synthetic bags generally perform better than paper bags. They trap dust and allergens better while maintaining their effectiveness even when nearly full.
Choose the right bag for your vacuum cleaner model
It is also important to choose a bag that is compatible with your model of vacuum cleaner. A bag that is too small or ill-fitting can affect the performance of the device. Check your vacuum’s user guide for the recommended bag type.
Keep the filter clean
Filters play a crucial role in the operation of the vacuum cleaner. They guarantee the quality of the air that is expelled from the device and prevent dust particles from entering the motor. A dirty or clogged filter can significantly reduce the performance of your vacuum cleaner.
Regularly clean the filters
To avoid a drop in performance, it is advisable to regularly clean the filters of your vacuum cleaner. The frequency of cleaning depends on the type of filter and how you use the device.
- washable filters should be cleaned monthly. You can wash them in warm soapy water and let them dry before putting them back on.
- Non-washable filters must be replaced when dirty or damaged. You can check their condition by following the manufacturer’s recommendations.
Check the condition of the brushes and accessories
Your vacuum’s brushes and accessories also have an impact on its performance. If they are damaged or dirty, they can limit the effectiveness of the suction.
Check the condition of the brushes
Regularly inspect the brushes of your vacuum cleaner to make sure they are not worn or deformed. If so, replace them to improve cleaning efficiency.
Clean the accessories
Also remember to clean the accessories of your vacuum cleaner, such as nozzles and nozzles. You can wash them in warm soapy water and let them dry before putting them back on the appliance.
Maintain motor and belt
The motor and the belt are essential to ensure the good performance of your vacuum cleaner. Regular maintenance can prolong their lifespan and ensure optimum operation.
Check engine condition
Make sure your vacuum’s motor is working properly by listening carefully to its noise when in use. An unusual noise or loss of power may indicate a problem with the engine. Consult a professional if you notice any abnormalities.
Check and replace the belt
The belt transmits the power from the motor to the brushes. A loose or damaged belt can affect the performance of your vacuum cleaner. Regularly check the condition of the belt and replace it if necessary.
Adjust the suction height according to the ground
Different floor types require specific settings for effective cleaning. Most vacuum cleaners have a function to adjust the suction height depending on the surface to be cleaned.
- On hard floorsset the vacuum to the lowest setting for optimal dust and debris pick-up.
- On rugs and carpets, adjust the suction height according to the thickness of the coating. A height that is too low can damage the carpet and reduce the effectiveness of the suction, while a height that is too high does not effectively remove the dirt embedded in the fibers.
By applying these tips, you can significantly improve the performance of your vacuum cleaner and ensure optimal cleaning of your interior. Remember that regular maintenance is key to ensuring the longevity and efficiency of your appliance.